Operation Manual

MIDI Functions
69
Connecting to a Personal Computer
By connecting your PSR-GX76’s MIDI terminals to a personal computer, you can
have access to a wide variety of music software.
When using a MIDI interface device installed in the personal computer, connect
the MIDI terminals of the personal computer and the PSR-GX76.
Use only special MIDI cables when connecting MIDI devices.
● Connect the MIDI terminals of the PSR-GX76 to the MIDI ter-
minals of the personal computer.
● When using a MIDI interface with a Macintosh series com-
puter, connect the RS-422 terminal of the computer (modem
or printer terminal) to the MIDI interface, as shown in the dia-
gram below.
MIDI INMIDI OUT
MIDI OUTMIDI IN
PSR-GX76
Computer
(sequencer software)
MIDI IN
RS-422
MIDI OUT
PSR-GX76
Computer
(sequencer software)
• When using a Macintosh series
computer, set the MIDI interface
clock setting in the application
software to match the setting of
the MIDI interface you are using.
For details, refer to the owner’s
manual for the software you are
using.
Viewing the Notation for MIDI
Channel 1
• The PSR-GX76 has a special
function that lets you view the
notes of the MIDI data (channel 1
only) on the display.
Bank LSB Cancel Function
• The PSR-GX76 lets you disable
or ignore incoming Bank LSB
messages, which might other-
wise cause problems when
selecting PSR-GX76 voices from
an external device. To cancel
Bank LSB messages, simulta-
neously hold down the lowest key
on the keyboard (C1) and turn
the power on ([STANDBY] but-
ton).