Owner's Manual

12 PSR-E213/YPT-210 Owner’s Manual

— Quick Guide —

Step

Changing the Voices

When turning the power on, bars appear at the left side in the display to

indicate the value of the master volume.

When you ﬁrst turn on the power, make sure to turn down the volume

of the instrument by pressing the MASTER VOLUME [-] button sev-

eral times. While playing the keyboard, adjust the volume level by

using the MASTER VOLUME [+] and [-] buttons.

When the power is turned on, the initial value is automatically set to 12

(indicated by six bars in the display).

Turn the power on and adjust the volume

Turning the power on

Adjusting the volume

If you are using the instrument in a quiet place and want a lower vol-

ume setting to start with, simultaneously hold down the MASTER

VOLUME [-] button and turn on the power with the [STANDBY/ON]

switch. This automatically sets the value to 4 (indicated by two bars).

Press the [STANDBY/ON] switch

to turn on the power.

Press the [STANDBY/ON] switch

again to turn the power off.

The volume increases as indicated by the bars

in the display.

GrandPno

001

• The value of master volume

cannot be saved.

NOTE

Press the [+] button to

increase the volume.

Press the [-] button to

lower the volume.