User Manual

Installing Pack Data on a Digital Instrument
8
Click any Pack or content item you wish to install and verify that is displayed on its icon.
4. Install the selected Pack(s) and content on your digital instrument.
As described below, this can be done in two different ways—using a USB flash drive or via wireless network.
Installation using a USB flash drive
4-1. Plug a USB flash drive into your computer and click Save as Pack Install File t in the Yamaha Expansion Man-
ager application.
4-2. Click Yes when asked to confirm whether you wish to proceed. A user verification dialog may then be displayed.
If so, enter the User ID and password you used when adding the Pack(s) to the My Packs page.
4-3. When the file save dialog is displayed, select a destination for saving the Pack content to be installed.
4-4. Click Save to start saving the content file to the USB flash drive. A window showing the state of progress will be
displayed.
4-5. When the Pack content has been saved, remove the USB flash drive from your computer, plug it into the digital
instrument, and import the content.
This completes the process for installation using a USB flash drive.
Installation via wireless network
4-1. Click Send to Instrument y in the Yamaha Expansion Manager application.
4-2. Click Yes when asked to confirm whether you wish to proceed. A user verification dialog may then be displayed.
If so, enter the User ID and password you used when adding the Pack(s) to the My Packs page.
4-3. Click OK when asked to confirm whether you wish to install the Pack content. Yamaha Expansion Manager will
now start installing on your digital instrument. A window showing the state of progress will be displayed.
Installation via wireless network will be complete when this window disappears.
NOTE
Content items may be displayed in gray or become unselectable if they are not supported by the instrument selected for installa-
tion.
NOTE
Refer to the Owner’s Manual or Reference Manual that came with your digital instrument for instructions on how to
import Pack content from a USB flash drive.