Specifications

Starting Up

PSR-A2000 Owner’s Manual 31

• Deleting characters

Move the cursor to the character you wish to delete by using the [DATA ENTRY]

dial, and press the [7 ▼] (DELETE) button. To delete all characters on the line at

once, press and hold the [7 ▼] (DELETE) button.

• Entering marks or space

1. Press the [6 ▼] (SYMBOL) button to call up the mark list.

2. Use the [DATA ENTRY] dial to move the cursor to the desired mark or space, then

press the [8 ▲] (OK) button.

• Selecting custom icons for ﬁles (shown at left of ﬁle name)

1. Press the [1 ▼] (ICON) button to call up the ICON SELECT display.

2. Select the icon by using the [A] – [J] buttons, [3 ▲▼] – [5 ▲▼] buttons or [DATA

ENTRY] dial. The ICON display includes several pages. Press the TAB [E][F]

buttons to select different pages.

3. Press the [8 ▲] (OK) button to apply the selected icon.

While holding the C6 key (right-most key on the keyboard), turn the [ ] (Standby/On)

switch on. This restores the all settings to the factory default.

You can also restore a speciﬁed setting to the factory default value, or save/load your

own reset settings. Call up the operation display: [FUNCTION] → [I] UTILITY →

TAB [E][F] SYSTEM RESET. For details, refer to the Advanced Features section

(page 189).

Other character-entry operations

NOTE

To cancel the operation, press the

[8 ▼] (CANCEL) button.

Restoring the Factory-programmed Settings

NOTE

If you want to initialize only the Regis-

tration Memory setting (page 75),

turn the [ ] (Standby/On) switch

on while holding the B5 key.