Specifications

Vocal Harmony

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● Reference 71

• Balance................This lets you set the balance between the lead and Vocal Harmony. Raising this value

increases the volume of the Vocal Harmony and decreases that of the lead vocal. If it is

set to the maximum value of 127, you will hear only the Vocal Harmony from the PSR-

9000’s speakers; if it is set to 0, only the lead vocal will be heard.

• Mode....................All of the Vocal Harmony types fall into one of three modes which pro-

duce harmony in different ways. The harmony effect is dependent on

the selected Vocal Harmony Mode and Track, and this parameter

determines how the harmony is applied to your voice. The three

modes are described below.

• VOCODER The harmony notes are determined by the notes you

play on the keyboard (VOICE R1, R2, R3, L) and/or

song data which includes Vocal Harmony tracks.

• CHORDAL During accompaniment playback, chords played in the

auto accompaniment section of the keyboard control

the harmony. During song playback, chords contained

in song data control the harmony. (Not available if the

song does not contain any chord data.)

• AUTO The harmony notes are produced in either Vocoder or

Chordal mode according to the current performance

method.

• Chord ...................The following parameters specify the song data which will be used for

chord detection.

• OFF Chords are not detected.

• XF Chords of XF format are detected.

• TR1-TR16 Chords are detected from note data in the speciﬁed

song track.

● Microphone

The following parameters determine how the microphone sound is controlled.

• Mute.....................When set to OFF, the microphone sound is turned off.

• Volume .................Adjusts the volume of the microphone sound.