Specifications

Auto Accompaniment
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● Reference
63
The PSR-9000 provides three ways to select files: SINGLE, MULTI, and ALL.
• When set to SINGLE, you can select only one style.
• When set to ALL, you can select all styles.
• When set to MULTI, you can select styles listed consecutively.
For more information about MULTI, see below.
To cancel “Multi” file selection, select “SINGLE” by pressing the [C] button twice.
■ Save Style from Flash ROM
This allows you to save style data from Flash ROM to disk.
■ Copy Style in Flash ROM
This allows you to copy style data to a different category/number in Flash ROM.
Follow the on-screen instructions.
■ Delete Style in Flash ROM
This allows you to delete style data in Flash ROM.
Follow the on-screen instructions.
■ Swap Style in Flash ROM
This allows you to exchange the data between files in different categories/numbers.
Follow the on-screen instructions.
■ Rename Style in Flash ROM
This allows you to rename the style file name.
Follow the on-screen instructions. Name entry is described on page 44.
■ Defragment Flash ROM
If you’ve used the Style Manager for a while, and/or have loaded and manipulated a number of
styles, the Flash ROM may have become “fragmented” (meaning that normally contiguous files
have been broken up into several fragments). Defragmenting the Flash ROM increases the contigu-
ous empty space on the disk, allowing you to more effectively use the remaining memory capacity.
To defragment the Flash ROM, follow the on-screen instructions.
About Selecting Files from Disk or Flash ROM
2 Select a file. (For “MULTI,” this will be the first
file in the group of files to be selected.)”
3 Select
“MULTI.”
4 Select the last file in the group. (All files between this
and the file selected in step #2 will be selected.)
See above.
When set to “with OTS,” you
can save the selected style
file with its One Touch Set-
ting setups.
NEXTBACK
PAGE CONTROL
See page 66 for details on
directory/file selection.
61
CAUTION
• When loading multiple files from disk
to Flash ROM, only the selected files
will be loaded to the destination loca-
tion in the Flash ROM (see page 62).
Keep in mind that the files are loaded
to consecutive locations starting
from the specified destination. Make
sure that the consecutive locations
contain no important data, otherwise
you may inadvertently overwrite files
you wish to keep.
If an optional SCSI device is connected or
the optional internal hard disk is installed,
select the appropriate device.
See page 127 for details.
1
Select “SINGLE.”
(Before using
“MULTI,” you’ll have to
specify the first file
using “SINGLE.”)
• The PSR-9000 can load files contain-
ing Registration Memory data created
on the PSR-8000, without having to
convert them. However, please note
that the five Flash styles listed in the
left column below should not be
deleted or replaced with different
styles, since they are used to substi-
tute for the corresponding PSR-8000
styles listed in the right column.
PSR-9000 Flash style PSR-8000 style
II-4 Analog Ballad Analog Pop
III-1 6/8 Trance Synth Boogie
IV-1 Bebop Bebop
X-5 Lovely Shuffle Pop Shuffle 1, 2
XIII-6 Musette Musette