Specifications

62 Reference ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
Auto Accompaniment
Style Manager
The PSR-9000 styles are divided into two groups : Preset styles and Flash styles.
Flash styles pre-recorded to Flash styles I through VIII can be replaced by the desired data
with the Style Manager function.
Since all Flash style data is stored to Flash ROM, any data in the selected Flash style location will be erased and replaced by
your new settings. This includes the factory programmed Flash style data (Flash styles I through VIII). If you've deleted the
factory-set data, you can use the Restore function (page 130) to load a copy of it from the included disks (page 6).
For details about Flash ROM, refer to "Memory Structure" on page 50.
The operations for each function corresponding to step #4 are covered in the following expla-
nations.
■ Load Style into Flash ROM
This allows you to load style data from disk to Flash ROM.
Basic Procedure
Style Manager
Flash Styles
in
Flash ROM
Disk Styles
Save
Load
T
YLE
BALLROOM
Y
3Select the desired function.
1Select a style
category.
4Execute the selected function.
2Select this to call up the
Style Manager display.
If an optional SCSI
device is connected or
the optional internal hard
disk is installed, select
the appropriate device.
See page 127 for details.
Select the destination file in Flash
ROM.
Choose one of the three methods
for selecting files (see next page).
Select this to listen to the selected
style file.
When set to “with OTS”, you can
load the selected style file with its
One Touch Setting setups.
Select this to display the property of
the selected file.
NEXTBACK
PAGE CONTROL
See page 66 for details on
directory/file selection.
60