Specifications

128
Reference ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
Disk Operations
Loading Data from a Disk to Flash ROM
This operation lets you load the specified file from a floppy disk, an optional hard disk,
or an optional SCSI device to Flash ROM.
The explanations here apply to step #3 of the Basic Procedure on page 127.
● Select a source file in the disk.
● Select a Load method.
If an optional hard
disk has been
installed or an
optional SCSI
device has been
connected, the
appropriate device
must be selected
here.
Select this to display
the property of the
selected file.
For details on directory file
selection, see page 66.
● Select the destination.
CAUTION
• When data is loaded from a
floppy disk to the PSR-9000,
the data already in the mem-
ory of the instrument will be
replaced by the data on the
disk. Save important data to
a disk file before doing the
Load operation.
• Loading style data can be exe-
cuted via the Style Manager
function (page 62).
Set the data type to ON or OFF.
Data types set to ON will be loaded.
Flash ROM data for which the data
type has been set to OFF will be
retained.
● Execute the Load operation by following the on-screen instructions.
Select the source data
in the disk.
Select the destination.
SETUP All setup data —
see list on page
144.
EFFECT
DATA
All User effect data
— page 92.
REGIS-
TRATION
All Registration
Memory data —
page 178.
MULTI
PAD
All Multi Pad data —
page 119.
CUSTOM
VOICE
All Custom Voice
data including wave
data saved using
the Wave save op-
tion — page 80.
ORGAN
FLUTES
All Organ Flutes
settings — page 56.
NEXTBACK
PAGE CONTROL
NEXTBACK
PAGE CONTROL
NEXTBACK
PAGE CONTROL
NEXTBACK
PAGE CONTROL
126