Specifications

112 Reference ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●

Style Creator

Style Editing (Full Edit)

This section explains various parameters, other than the basic ones.

The explanations here apply to step #5 of the Basic Procedure on page 106.

■ Setup

● Voice

This function can be used to change the voices assigned to any of the current style’s parts.

While the SETUP display is selected, all other available parameters can be modiﬁed as

required via the MIXING CONSOLE displays.

● Setup Copy

Instead of starting with all the sections and/or parts from the selected original style, you can

copy speciﬁc parts from other sections/parts of the same style, or from other styles as

required.

■ Edit

• Quantize ........................... Refer to page 92.

• Velocity Change ................ Boosts or cuts the velocity of all notes in the speciﬁed part by the speciﬁed per-

centage.

• Measure Copy................... This function allows data to be copied from one measure or group of measures

to another location within the same part.

Use the TOP and LAST LCD buttons to specify the ﬁrst and last measures in

the region to be copied. Use the DEST LCD button to specify the top of the

measure to which the data is to be copied.

If the copy destination falls outside the number of measures actually in the

part, the corresponding source measures will not be copied.

• Measure Clear .................. This function clears all data from the speciﬁed range of measures within the

speciﬁed part. Use the TOP and LAST LCD buttons to specify the ﬁrst and last

measures in the range to be cleared.

• Remove Control Event...... This function can be used to remove all occurrences of a speciﬁed type of con-

trol event from a speciﬁed part. Use the EVENT LCD buttons to select the type

of event to be removed.

• Remove Duplicate Notes .. Removes all duplicate notes from a speciﬁed part.

Select the desired menu.

110