Operation Manual

Wave Edit

The WAVE EDIT display is accessible from the SAMPLING MENU when at least one wave is in the wave

memory.

The WAVE EDIT mode includes the following functions:

EDIT

1: SELECT WAVE ................................................................................. 93

2: RESAMPLING................................................................................... 93

3: LOOP POINT .................................................................................... 94

4: NORMALIZE ..................................................................................... 95

5: VOLUME/TUNE................................................................................. 95

NAME/CLEAR/DISK

1: WAVE NAME ..................................................................................... 96

2: CLEAR............................................................................................... 96

3: EXPORT AS WAV ............................................................................. 96

4: DELETE............................................................................................. 96

Select the EDIT or NAME/CLEAR/DISK display via the

and LCD button to the right of the display,

then use the ▲ and ▼ LCD buttons to the left of the display to select the desired function.

In all edit displays the

LCD button can be used to switch between the currently selected wave and the

currently selected panel voice.

While in the WAVE EDIT mode, the

LCD button in the upper left corner of the display will take you directly

to the WAVEFORM EDIT mode (page 97). The [EXIT] button will take you back to the SAMPLING MENU.

■ EDIT .......................................................................................................

1: SELECT WAVE

Selects the wave to be edited. Use the WAVEFORM LCD

dials to select the waveform containing the wave to be edited,

then use the WAVE LCD dials to select the wave to be edited.

The name of the selected wave and waveform appear at the top

of the display.

2: RESAMPLING

The PSR-8000 originally records waves at 44.1 kHz. WAV

and AIFF files are also imported as 44.1 kHz waves. The

RESAMPLING function lets you reduce the sampling fre-

quency of waves, thus reducing the amount of memory they

occupy. Please note, however, that reducing the sampling fre-

quency also reduces the sound quality.

The original sampling frequency of the selected wave is

shown under ORIGINAL SAMPLING FREQ on the display.

Use the RESAMPLING FREQ LCD dials to select the desired

resampling frequency. Only resampling frequencies which are

lower than the original sampling frequency will be available

(resampling will not be possible beyond 11.025 kHz). Press the

Sampling