Operation Manual

58
Custom Voice Creator
■
FILTER RATE....................................................................................................................................................................................
Set the rate of cutoff frequency variation. Higher values pro-
duce faster variation.
■ FILTER LEVEL ............................................................................
These parameters set the amount of variation from the preset
cutoff frequency. Level “0” is the preset value.
■ PITCH LEVEL...............................................................................
These parameters sets the pitch envelope level offset value.
• Some parameter settings may have minimal or no
effect with some voices.
INITIAL Sets the initial offset of the envelope.
DECAY1, Set the offsets after DECAY1, DECAY2, and
DECAY3 variation.
RELEASE Sets the offset after PITCH RATE RELEASE
variation after key-release.
DECAY2,
DECAY3
INITIAL Sets the length of time the initial filter envelope
level will be maintained. Higher values correspond
to shorter time.
DECAY1, Set the rate of variation between the initial filter
envelope level and the levels set by the FILTER
LEVEL DECAY1, DECAY2, and DECAY3 param-
eters, respectively.
RELEASE Sets the rate of variation from the offset at key-
release to the offset set by the FILTER LEVEL
RELEASE parameter when SUSTAIN is off.
SUSTAIN Sets the rate of variation from the offset at key-
release to the offset set by the FILTER LEVEL
SUSTAIN parameter when SUSTAIN is on.
DECAY2,
DECAY3
INITIAL Sets the initial level of the envelope.
DECAY1, Set the levels after DECAY1, DECAY2, and
DECAY3 variation.
RELEASE Sets the level after FILTER RATE RELEASE
variation after key-release when SUSTAIN is off.
SUSTAIN Sets the level after FILTER RATE SUSTAIN
variation after key-release when SUSTAIN is on.
DECAY2,
DECAY3
■ PITCH RATE (Pitch Envelope Rate).......................................................................................................................................
These parameters set the rate of pitch variation. Higher values
produce faster variation.
DECAY1, Set the rate of variation between the initial pitch
envelope level and the levels set by the PITCH
LEVEL DECAY1, DECAY2, and DECAY3 param-
eters, respectively.
RELEASE Sets the rate of variation from the level at key-
release to the level set by the PITCH LEVEL
RELEASE parameter.
DECAY2,
DECAY3