Operation Manual

52
Custom Voice Creator
The EASY EDIT Mode has the following display pages:
EDIT....................................................................................................... 52
STORE/CLEAR ...................................................................................... 53
Use the
and LCD buttons to the right of the display to select the EDIT and STORE/CLEAR display pages.
Use the ▲ and ▼ buttons to the left of the display to select the various parameters within each page.
The COMPARE LCD button can be used during editing to compare the sound of the original voice with the edited
voice.
The Easy Edit Parameters
EDIT
The timbre of the voice can be varied via the FREQ. and
RESONANCE LCD dials. “0” is the preset value for both
parameters. “+” FREQ. settings produce a brighter sound,
while “+” RESONANCE settings produce a more “peaky”
sound.
■ EG ............................................................................................................
The EG (Envelope Generator) parameters affect the volume
envelope of the voice.
The ATTACK LCD dial sets the time it takes for maximum
level to be reached after a key is pressed. “0” is the preset value.
“+” settings produce a faster attack.
The DECAY LCD dial sets the time it takes to reach the
sustain level after the maximum attack level has been reached.
“0” is the preset value. “+” settings produce a faster decay.
The RELEASE LCD dial sets the time it takes for the sound
to diminish to zero after a key is released. “0” is the preset value.
“+” settings produce a faster release.
• These parameters may have different effects on different voices.
■ FILTER.....................................................................................................................................................................................................
TIME
KEY ON KEY OFF
LEVEL