Operation Manual
49
Organ Flute Voice Editing
component of the voice. Use the LCD dials to increase or reduce the amount of the corresponding footages to create
the desired overall sound. The longer a graphic footage bar, the greater the amount of the corresponding footage
added to the sound.
■ VOLUME & ATTACK..................................................................................................................................................................
To access the VOLUME and ATTACK parameters for the
ORGAN FLUTE voice, press the VOLUME/ATTACK LCD
button from the FOOTAGE display.
The VOLUME control adjusts the overall volume of the
ORGAN FLUTE voice. The longer the graphic bar, the greater
the volume.
The MODE control selects the FIRST or EACH attack
mode: in the FIRST mode attack will only be applied to the first
note in a chord or group of notes played and held simulta-
neously; in the EACH mode attack will be applied equally to all
notes.
■ EFFECT & EQ SETTINGS ...................................................................................................................................................
Press the SETTING LCD button on the right side of the display to access the ORGAN FLUTE voice effect and EQ
settings. When the SETTING display is showing, press the RETURN LCD button to return to the main ORGAN
FLUTE editing display.
The ATTACK controls adjust the attack sound of the ORGAN FLUTE voice. The 4', 2
2/3
' and 2' controls
increase or reduce the amount of attack sound at the corresponding footages. The longer the graphic bar the greater
the attack sound.
The LENGTH control affects the attack portion of the sound producing a longer or shorter decay immediately
after the initial attack. The longer the graphic bar the longer the decay.
The RESP. control affects the sustain portion of the sound, increasing or decreasing the response time of the
initial swell and release, based on the FOOTAGE controls. The higher the value the slower the swell and release.
● 1: EFFECT DEPTH & VIBRATO SPEED
This group of parameters inlcudes ON/OFF and DEPTH set-
tings for REVERB, CHORUS, and the DSP effect selected
below. VIBRATO SPEED specifies the speed of the vibrato
effect controlled by the Vibrato On/Off and Vibrato Depth LCD
dials in the main ORGAN FLUTE editing display.