Operation Manual

154

Second SIMM

After confirming the orientation, insert the second SIMM

into the FRONT SLOT (the slot closest to the PSR-8000

keyboard), and raise it to the vertical position in the same

way as the first SIMM.

3 -3

Installing Options

3 -2

C-2 Install the first SIMM in the REAR SLOT (the slot

closest to the PSR-8000 rear panel), inserting it at an

angle as shown in the illustration.

Make sure that the parts at locations A, B, and C are

properly aligned.

• Lug

• SIMM hole

• Slot protrusion

• SIMM notch

•Lug

• SIMM hole

C-3 Holding both edges of the SIMM module, raise it to

the vertical position until it is firmly clamped by the

left and right stoppers.

• Make sure that the entire length of the

SIMM is evenly inserted.