Operation Manual

149
The displayed disk free area value does not
coincide with the actual value.
Disk save operations — particularly when
saving wave/waveform data to floppy disk —
take a long time.
In the SAMPLING WAVEFORM EDIT mode,
added waves don’t sound.
Appropriate harmony notes are not pro-
duced by the VOCAL HARMONY feature.
The MIDI connectors don’t seem to be
functioning properly.
The value is an approximate value.
This is normal. It takes approximately 8 minutes to save 1 megabyte
of data to a floppy disk.
Have you set an appropriate START NOTE prior to adding the wave?
See page 98.
Make sure you are using the appropriate method to specify the
harmony notes for the current VOCAL HARMONY mode. See page
84.
The MIDI connectors will only work when the HOST SELECT switch
is set to MIDI.
Symptom Possible Cause/Solution
Troubleshooting