User Guide

16
Using the Organ Flute Voices
The PSR-7000 has 18 preset ORGAN FLUTE voices
which can be selected in the same way as the RIGHT,
LEAD and LEFT voices: press an ORGAN FLUTE voice
group button — [COMBI 1-6], [COMBI 7-12], or [COMBI
13-18] — and then press the LCD button corresponding
to the desired voice in the selected group. The main
difference between the ORGAN FLUTE voices and oth-
ers is that the ORGAN FLUTE voices can be directly
edited via the voice list display. The editing controls
appear below the voice list (turn [LIST HOLD] on to
keep the voice list and editing controls on the display).
■ FOOTAGE.............................................................................................................................................................................................
The basic sound of the currently selected OR-
GAN FLUTE voice is edited via FOOTAGE bars
corresponding to the LCD dials. If the FOOTAGE
display is not showing, press the FOOTAGE LCD
button in the ORGAN FLUTE voice list display.
The term “FOOTAGE” is a reference to the fact that
the sound of pipe organs was adjusted via “stops”
which turned on or off pipes of different lengths (in
feet). The longer the pipe, the lower the pitch of the
sound, thus the 16' (16-foot) FOOTAGE bar adjusts
the volume of the lowest pitched component of the
voice while the 1' bar adjusts the highest-pitched
component of the voice. Use the LCD dials to
increase or reduce the amount of the corresponding
footages to create the desired overall sound. The
longer a graphic footage bar, the greater the amount
of the corresponding footage added to the sound.
Playing the PSR-7000
COMBI
1~6
COMBI
7~12
COMBI
13~18
ROTARY
SPEAKER
SPEED
SLOW
FAST
ORGAN FLUTE
ORGAN FLUTE