Specifications

ManualsBrandsYamaha ManualsOtherPSR-7000

100

Custom Voice Edit

The Full Edit Parameters

The FULL EDIT mode can be entered as described on page 78. The FULL EDIT mode can be used to edit both

internal voices and voices in the custom voice group.

Use the [

] and [ ] LCD buttons to the right of the display to select the E1:BASIC, E2:CONTROLLER,

E3:ENVELOPE, E4:EFFECTS and STORE/CLEAR display pages. Use the ▲ and ▼ buttons to the left of the

display to select the various parameters within each page.

Many PSR-7000 orchestra voices are actually made up of two sounds “layered” together. Each of these layers

is called an “element”. SINGLE will appear in the upper left corner of the display when a 1-element voice is being

selected for editing, and DUAL will appear when a 2-element voice is selected. DRUM will appear when a drum kit

voice has been selected (drum kit voices are all single-element). When a 2-element voice which allows individual

editing of each element is selected the ELEMENT LCD button can be used to select the element to be edited: A or

B. The COMPARE LCD button can be used during editing to compare the sound of the original voice with the edited

voice.

E1:BASIC

■ NAME........................................................................................................................................................................................................

■ WAVE (except for the DRUM KITS)...................

A name of up to 12 characters can be entered for

each custom voice. Use the < > LCD dial to move

the name cursor to the various character positions,

then use the A~Z, a~z or 0~9… LCD dial to

select the required character for each position. The

A~Z LCD dial selects capital letters, the a~z LCD

dial selects lowercase letters, and the 0~9… LCD

dial selects numbers and special characters.

Use the WAVE ▲▼ LCD dials to select a wave.

The “wave” is the raw sound on which the voice is

based. 2-element voices use two waves. The PSR-

7000 has 656 waves in internal read-only memory.

External waves from custom voices loaded from

disk can also be used.