User Guide

51
The Sequencer
To select the record track(s) and engage the record-
ready mode, hold the [RECORD] button and press the
appropriate track button(s). The red REC indicator for
the tracks will flash. Also note that the AUTO BASS
CHORD indicator will light automatically when the
ACCOMP. track is selected.
NOTES
The upper markings on the track buttons apply when the
SEQUENCER mode is engaged (1 through 7, and
ACCOMP.). The lower markings when the CUSTOM
ACCOMPANIMENT PROGRAMMER described on page
62 is operating.
If you are adding new material to tracks that have already
been recorded, the [
r
] and [
f
] buttons can be used at
this point to move to any measure number from which you
want to begin recording. The [
r
] and [
f
] buttons will not
function once recording has been started.
SEQUENCER / CUSTOM ACCOMPANIMENT PROGRAMMER
CHORD 1 CHORD 2 CHORD 3 CHORD 4 CHORD 5 CHORD 6 BASS RHYTHM
1 2 3 4 5 6 7 ACCOMP.
PLAY/REC PLAY/REC PLAY/REC PLAY/REC PLAY/REC PLAY/REC PLAY/REC PLAY/REC
RECORD DELETE EDIT
CUSTOM ACCOMP.
SEQUENCER
B Start Recording .............................................................................................................................................................................
Recording will start as soon as the [START/RE-
START] button is pressed or, if you also press the
[SYNCHRO START] button, as soon as any key on
the keyboard is pressed.
If the ACCOMP. track is selected and you start
recording by pressing the [START/RE-START] but-
ton, only the rhythm will play until the first chord
(FINGERED or SINGLE FINGER) is played on the
left-hand section of the keyboard.
If you start recording in the SYNCHRO START
mode by playing on the right-hand section of the
keyboard, a metronome will sound in place of the
rhythm and AUTO BASS CHORD accompaniment
until a key is played on the left-hand section of the
keyboard.
NOTES
You can also start recording with an introduction by
pressing any of the [INTRO] buttons.
The restart function can not be used while the sequencer
mode is engaged.
Previously recorded fill-ins may not always be erased if
that section is re-recorded or deleted.
SYNCHRO
START
START/
RE-START
STOPSOLO
SEQUENCER / CUSTOM ACCOMPANIMENT PROGRAMMER
RECORD DELETE EDIT
ENDING/
rit.
FILL INFILL IN
INTRO 3INTRO 2INTRO 1