User Guide

39
5 PITCH BEND SELECT
+– +–
PITCH BEND SELECT
Orch1=ON Orch2=ON
6 WHEEL SELECT
+– +–
†⁄WHEEL SELECT
Orch1=ON Orch2=OFF
+–
⁄WHEEL SELECT ‡
Type=Modulation
Procedure:
Use the left [-] and [+] buttons to turn pitch wheel control
on or off for the orchestra 1 voice, and the right [-] and [+]
buttons to turn pitch wheel on or off for the orchestra 2
voice.
Notes:
If, for example, you’re using the split mode (ORCH.
2v1) with a bass voice on the left and a sax voice on the
right, you’ll want pitch bend to apply only to the right-hand
sax voice. In this case simply turn orchestra 1 pitch bend on
and orchestra 2 pitch bend off.
If AUTO BASS CHORD is on and the ORCH. 2v1 or-
chestration mode is selected, no pitch bend is applied to the
ORCH. 2 voice.
Purpose:
Determines whether the PITCH BEND/GLISSANDO
wheel will affect the orchestra 1 voice, the orchestra 2 voice,
or both orchestra voices.
Procedure:
Use the left [-] and [+] buttons to select either “Modula-
tion” or “Effect” operation, then press the [>] button to
move to the second display screen and use the left [-] and [+]
buttons to turn wheel control on or off for the orchestra 1
voice, and the right [-] and [+] buttons to turn wheel control
on or off for the orchestra 2 voice.
Notes:
This function can be used to apply modulation or the se-
lected effect to just one of the voices being played in the split
mode (ORCH. 2v1) to emphasize that voice and provide
greater contrast with the other voice.
When “Effect” operation is selected, the wheel will func-
tion only when the panel [EFFECT] button is turned on.
If AUTO BASS CHORD is on and the ORCH. 2v1 or-
chestration mode is selected, no modulation is applied to the
ORCH. 2 voice.
Purpose:
Determines whether the MODULATION/EFFECT wheel
will control modulation or the selected effect (page 36), and
whether it will affect the orchestra 1 voice, the orchestra 2
voice, or both orchestra voices.
[F3] Controller & Key Velocity