Specifications

46
Registration Memory
The Freeze Function
If you press the [FREEZE] button so that its LED lights, selecting a
different registration setup will not change the settings specified in the
FREEZE GROUP SETTING display accessed either via the registration
EASY SETTING display or the [FUNCTION] button (page 114).
FREEZE MEMORY
BANK 1~16
+
–
12
You can specify which settings are affected by the FREEZE function via the FREEZE GROUP SETTING
function accessible via the registration EASY SETTING display. The same function is also available via the
FUNCTION display — page 114.
The Freeze Group Settings
Z Select the FREEZE GROUP SETTING Function ........................................................................................
Press the EASY SETTING LCD button that ap-
pears when a BANK button or the [MEMORY]
button is pressed before it disappears. When the
easy setting display appears, select the FREEZE
GROUP SETTING function by pressing the corre-
sponding LCD button.
X Mark the Settings to be “Frozen” .....
Use the GROUP SELECT LCD [▲/▼] controls
to select a setting you want to freeze or “un-freeze”,
then use the MARK LCD [▲/▼] control to set or
remove the check mark for that setting. Repeat until
all settings are marked or un-marked as required.
C Exit When Done.............................................................................................................................................................................
Press either the EXIT LCD button or the panel
[EXIT] button when done.