Manual

98
UTILITY — FORMATTING AN UNFORMATTED DISK
1 Insert the unformatted floppy disk into the disk
drive.
A “Format?” message will appear at the top of the display.
Press the UTILITY button to exit from the FORMAT screen.
• If you insert an
unformatted disk with the
write protect tab in the ON
position into the drive, a
“Protect” message appears.
Eject the disk, move the
protect tab to the OFF
position, and reinsert it in
the drive.
• If a disk that cannot be
read by the PSR-340 is
inserted into the disk drive,
it will be treated the same
as an unformatted floppy
disk. Take care not to erase
important data by acciden-
tally formatting a disk.
2 Press the EXECUTE button.
3 Execute the Format operation.
Press the + button (“YES”), and the Format operation will start. Once
started, the operation cannot be canceled.
During formatting, “Formting” will appear at the top of the display.
When the operation is completed, the following display briefly appears.
If you do not intend to format the disk, press the - button (“NO”) instead
of the + button (“YES”).
DISK OPERATIONS
CUE
Format?
YES
Sure?
072
Formting
End
96