Manual

95
4 Press the EXECUTE button.
If you have selected a file to
which data has already
been saved, “yES Rewrite?”
will appear on the top line
of the display.
5 Execute the Save operation.
Press the + button (“YES”), and the Save operation will start. Once started,
the operation cannot be canceled.
As the file is saving, “Saving” will appear on the top line of the display.
When the operation is completed, the following display briefly appears.
If you do not intend to save the file, press the - button (“NO”) instead of
the + button (“YES”).
• If there isn’t enough space
on the disk, a “DiskFull”
message appears, and you
will not be able to save any
data. You can delete
unneeded files on the disk
(page 97), or replace the
disk with a new one and
repeat the save operation.
• If a write error occurs
during a save operation, an
“Error” message appears. If
the error reoccurs after
repeating the save opera-
tion, there could be
something wrong with the
disk. Insert a different disk
in the drive and retry the
save operation.
DISK OPERATIONS
YES
Filename
USr
Saving
End
93
CAUTION
While the file is being saved
(the DISK IN USE lamp is
lit), never eject the floppy
disk or turn the power off.