Portatone Owner's Manual

Using, Creating and Editing Songs
Recording Your Performance
PSR-3000/1500 Owner’s Manual
161
4 Press the [D] (EXECUTE) button to execute the SETUP recording oper-
ation.
5 Press the [I] (SAVE) button to call up the Song Selection display for saving
your data, then save the data in the Song Selection display (page 67).
Editing Note or Chord Events (CHORD, 1–16)
The explanations here apply to the CHORD and 1–16 tab displays in step 4 of the
Basic Editing Operation on page 156.
1 When the 1–16 tab display is elected, press the [F] button to select
the channel to be edited.
2 Move the cursor to the desired data.
To move the cursor up or down ..............................Use the [A]/[B] button.
To move the cursor to the top data ..........................Press the [C] button.
To move the cursor by Measure/Beat/Clock units ....Use the [1 π† ]–
[3 π† ] buttons.
3 Edit the data.
Editing the data line by line
Use the [6 π† ]–[8 π ] buttons to cut/copy/paste/insert/delete the
events.
Editing each parameter of the data
1 Use the [D]/[E] buttons to select the parameter to be edited.
2 Use the [4 π† ]/[5 π† ] buttons to edit the parameter value. The
[DATA ENTRY] dial can also be used. To actually enter an edited
value, simply move the cursor away from the parameter.
To restore the original value, press the [8 † ] (CANCEL) button before move
the cursor.
4
When the CHORD tab display is selected, press the [F] (EXPAND) but-
ton to convert the data into Song data.
5
Press the [I] (SAVE) button to call up the Song Selection display for
saving your data, then save the data in the Song Selection display
(page 67).
CAUTION
The recorded Song data will
be lost if you select another
Song or turn the power to the
instrument off without exe-
cuting the Save operation
(page 67).
Se
l
ect
i
ng mu
l
t
i
p
l
e
li
nes o
f
data
While holding the [J] (MULTI
SELECT) button, press the [A]/[B]
buttons.
Displaying specific types of
event (FILTER)
You can select the event types to
be displayed in the [CHORD]
and [1-16] tab displays. This is
convenient, for example, when
you wish to have only the note
events shown (page 163).
CAUTION
The recorded Song data will
be lost if you select another
Song or turn the power to the
instrument off without exe-
cuting the Save operation
(page 67).
Chord and Section data recorded
with Realtime Recording cannot
be indicated and edited on this
display.