User Manual

ProVisionaire Design DME7 Component Guide
34
b [Clear] button
This button removes all the channels registered to a group.
c
[ON] button
This button switches between on and off for each group. When set to off, the signals
registered to this group are muted.
: On : Off (mute)
If any input signal has been registered to multiple groups, that signal will be muted when
any of the groups to which it has been registered are turned off.
d
[Offset] knob
The offset value added to the input channels registered to the group. If any input signal
has been registered to multiple groups, the offset values from any of the groups to which
it has been registered will be added before it is output.
e [Level Min]/[Level Max] knobs
Sets the upper and lower limits of the offset.
Control
Parameter types of the input/output values for each Port
Input Value Control Parameter Output Value
Type Range Input Port Name Parameter Range Output Port Name Type Range
Value Num 0,1
●
A In1 OFF:0, ON:1
●
A In1 Value Num
OFF:0,
ON:1
Value Num 0,1
●
B In1 OFF:0, ON:1
●
B In1 Value Num
OFF:0,
ON:1
Value Num 0,1
●
C In1 OFF:0, ON:1
●
C In1 Value Num
OFF:0,
ON:1
Value Num 0,1
●
D In1 OFF:0, ON:1
●
D In1 Value Num
OFF:0,
ON:1
Value Num 0,1
●
E In1 OFF:0, ON:1
●
E In1 Value Num
OFF:0,
ON:1
Value Num 0,1
●
F In1 OFF:0, ON:1
●
F In1 Value Num
OFF:0,
ON:1
Value Num 0,1
●
G In1 OFF:0, ON:1
●
G In1 Value Num
OFF:0,
ON:1
Value Num 0,1
●
H In1 OFF:0, ON:1
●
H In1 Value Num
OFF:0,
ON:1
Value Num 0,1
●
On A OFF:0, ON:1
●
On A Value Num
OFF:0,
ON:1
Value dB
−∞–
10.00
●
Offset A −∞–10.00
●
Offset A Value dB
−∞–
10.00
Normalized
0.00–
10.00