Owner's Manual

ManualsBrandsYamaha ManualsDigital MixersYamaha PM5D/PM5D-RH

241

242

243

244

245

246

247

248

249

250

PM5D/PM5D-RH Owner’s Manual Reference section 245

Information shown

in the display

Function

Global

functions

Output

functions

Input

functions

Appendices

E DELAY

This specifies the delay time for each surround channel

in a range of 0–1000 msec. The current value is shown

by the two boxes below the knob. (The upper box

shows the delay time in millisecond units, and the

lower box shows the delay time in the units selected in

the MIX 1-24 screen of the OUT DELAY function.)

F DELAY ON/OFF

Turns the delay on/off for each surround channel.

G FADER (Fader level)

Adjusts the level of the signal sent from the surround

channel to the corresponding MIX bus in a range of

–∞ to +10 dB. The current value is shown in the box

below.

H CUE

This button lets you cue-monitor the surround chan-

nel. This is linked with the [CUE] key of the

corresponding MIX channel.

I ON/OFF (Channel on/off)

Turns the surround channel on/off. This is linked with

the MIX [ON] key of the corresponding MIX channel.

J Level meter

Indicates the output level of the surround channel.

K Surround channel

This is the name of the surround channel.

OUTPUT VIEW function

This screen displays the mix parameters of the currently

selected MIX channel, MATRIX channel, or STEREO A/B

channel. In this screen you can also edit the principal

parameters and access other screens.

A Channel

This is the number of the channel you are editing. If

the corresponding MIX/MATRIX channel is paired (or

if a STEREO A/B channel is selected), a heart symbol is

displayed at the right. You can click this symbol to

enable/disable pairing for the MIX/MATRIX channel.

Note

The screen shown above is for when a paired channel is

selected. If the selected channel is not paired, the parameters

for only one channel are displayed, and pairing-related set-

tings are not displayed.

B EQ

This area shows the post-EQ level, the approximate EQ

response, and the EQ on/off status. You can click the

EQ ON/OFF button to switch EQ on/off in this screen.

5 7 8 J

CH VIEW (Channel view) screen

CH VIEW