Owner's Manual

Editing the DX Native Part Parameters

(XG Plug-in System)

Any of the DX voices can be freely edited from the front panel with the DX Part parameters. These

same parameters can also be edited from a computer using the DX Easy Editor software (in

XGworks).

Keep in mind that changing the Part parameters does not permanently affect the original voice set-

tings. The edits that you make here temporarily change the settings of the currently selected voice.

When you select a different voice for the Part, the settings are applied to the newly selected voice.

● The Part parameter settings cannot be saved in Multi Play mode. If you wish to save your Part parameter

edits, do it from the Performance mode or the DX Easy Editor. If you wish to save your edits to a voice, use the

DX Simulator software to edit the parameters of a voice, then save it as a User voice.

● The example displays used in the following explanations are all taken from the MU128.

1 Select the Part having the DX voice, then select the desired voice.

Select the appropriate Part with the PART -/+ buttons, then, with the cursor at the Voice Number

parameter, select the desired voice.

2 Press the EDIT button to enter the Edit mode.

3 Select the “PLUGIN” menu.

Use the SELECT > button, then press the ENTER button. The PLG150-DX Edit menu appears.

4 Select the desired parameter.

Use the [SELECT </>] buttons.

5 Adjust the value or change the setting for the selected parameter.

Use the [VALUE +/-] buttons.

6 Return to the main Play display.

Press the [EXIT] button several times, or press the [PLAY] button once.