Owner's Manual

23
Editing the DX Native Part Parameters
(Modular Synthesis Plug-in System)
● Keep in mind that the parameter values and settings below represent offsets of the actual voice settings. This
means that adjustments made to the parameters may not make much change in the actual sound, depending
on the original settings of the voice. For parameter values, a setting of “0” results in no change, while positive
and negative values increase and decrease the value respectively.
● The following explanations show how to edit the DX native part parameters when creating PLG voices, using
the CS6x Control Synthesizer as an example. For information on storing the PLG voices with your particular
Modular Synthesis Plug-in System compatible instrument, refer to the owner’s manual of that instrument.
1 Select the desired DX voice, as described in “Selecting DX Voices” on
page 22.
2 Press the EDIT button.
The EDIT menu display appears.
3 Turn knob A clockwise until “Elem” is shown at the bottom left of the dis-
play.
4 Turn the PAGE knob clockwise until “PLG150-DX” is shown at the bottom
left of the display.
Keep turning the knob to select the different DX Part parameters, indicated just above knob C and
knob 2.
5 Use knobs C and 2 to select the desired parameter and change the value.
Once one of the parameters is selected (the arrow cursor appears next to the value), you can also
adjust the value with the DATA knob or the DEC/INC buttons.
● In order to store User voices on a Modular Synthesis Plug-in System compatible instrument that
have been edited/created with the computer-based DX Simulator (or with the compatible instrument
itself), you’ll need to use an external memory device, such as a memory card. For details on storing
voices, refer to the owner’s manual of your Modular Synthesis Plug-in System compatible instru-
ment.
● The actual parameter names may differ, depending on whether the instrument you are using is XG
Plug-in System compatible or Modular Synthesis Plug-in System compatible. For details, refer to
the Parameter List (XG / Modular Synthesis Plug-in System).
GEN Name) Ctgry a-Z 0-? Cursor
Common [--:MM-Pno 1 ]
OSC Assign) Bank Number
Elem 083/065 1[MM-Pno 1]
NTV Param) Carrier1 Carrier2 
PLG150-DX +00 ***