Owner`s manual
21
Installing and Starting the Plug-in Editor Software (Windows 95/98)
Starting the DX Simulator
1 Start XGworks (or XGworks lite).
2 Click the “Plug-in” menu and select “DX
Simulator.”
Alternately, press Alt + P, then D, and ENTER. The
“Select DX Part” dialog box appears.
3 Set the desired Part number and click “OK.”
The DX Simulator window appears.
If the PLG150-DX has been properly installed and all computer/MIDI connections have been
properly made, operating the DX Simulator should directly affect the PLG150-DX. For details
on using the DX Simulator, refer to the on-line help file that is included with the software.
● To use the DX Simulator, your copy of XGworks must be version 1.05 or later.
You can download the proper update of XGworks or XGworks lite from the Yamaha website
(http://www.yamaha.co.uk).
● When using a Modular Synthesis Plug-in System “mother” device, the Part assignment depends on
which mode is used — Voice or Performance — and also on whether the PLG150-DX board is
installed/assigned to PLG1 or PLG2, as described below.
When using the Voice mode:
Depending on which slot the PLG150-DX board has been installed to, press PLG1 or PLG2,
then set the Part to “1” (no matter what the PLG1 or PLG2 assignment is).
When using the Performance (Multi) mode:
If the PLG150-DX board is assigned to PLG1, set the Part to “16.”
If the PLG150-DX board is assigned to PLG2, set the Part to “15.”