Conference Phone User Manual
Table Of Contents
- Important Safety Instructions
- Caution: Read This Before Operating Your Unit.
- Contents
- Features
- About this Manual
- Preparation Procedure
- Configuring the Settings
- Setting the Menu List
- Registering the IP network information
- Setup of telephone function
- Configuring the sound settings
- Configuring the general settings
- Adjusting the ring tone volume
- Controlling the system using the remote operation function
- Configuring the backlight off setting
- Adjusting the LCD contrast
- Selecting the menu language (Language)
- Setting the date and time manually
- Setting the time zone
- Setting the daylight saving time
- Selecting the SNTP server for synchronization
- Selecting the SNTP synchronization interval
- Call history management
- Setting the password
- Calling a ProjectPhone system in the same subnet
- Setting the Date and Time
- Editing the Address Book
- Using the SIP Server
- Hierarchical Connection of Multiple ProjectPhone (Cascade Connection)
- Interlocked Connection of ProjectPhone Systems
- Connection Using Audio Connection Cables
- Updating the Firmware
- Troubleshooting
- Resetting this Unit
- Obtaining the Setting Information for Support on this Unit
- Confirming the System Log Message of This Unit (Syslog)
- Specifications
- Notes on Transferring/Disposing this Unit
![](/manual/yamaha/pjp-50r/conference-phone-user-manual/images/img-14.png)
Preparation Procedure
9
English
INSTALLATION
14 Use the numeric keys to enter the IP address
of the DNS server referenced by this unit,
and then press .
The entered DNS server IP address is registered, and
the “Network Settings” menu reappears.
15 Press repeatedly until the initial display
appears, and confirm that the IP address of
this system is displayed in it.
3. Subnet Mask
2. IP Address
1. DHCP
Network Settings
(192.168.100.200)
Menu :Address
2007.09.20 12:16:14
Tel & IP ready