User Manual
Table Of Contents
- Cover
- What is Amp Editor?
- Special Notices
- Contents
- Preparing for operation
- An overview of Amp Editor
- Setup
- Basic operations in Amp Editor
- Main panel window
- Objects in the window and their function
- Menus in the main panel window
- Preferences
- Event Log
- Device Information
- Scene Manager
- Alert Setup
- Word Clock (TXn only)
- Speaker Processor Library Manager (TXn only)
- Clock
- Language (TXn only)
- GPI (ACD1 only)
- Utility
- IP Address
- IP Control Port No.
- Firmware Update (Updating the internal firmware)
- Scene Link Manager (for devices other than XMV)
- Network Setup
- Synchronization (Synchronization with devices)
- Custom Control Panel Manager
- System View Creator
- Speaker Processor Library Converter
- Tree View window
- Detail View window
- Device Properties window
- Signal Path View window (TXn only)
- Component editor (TXn only)
- Custom control panels
- Appendix
Chapter 5 Main panel window
Amp Editor Owner’s Manual
87
2. Select the folder that contains the update file, and click the [OK] button.
The “Firmware Update” dialog box will appear. The name of the device connected offline, the current
firmware version, and the IP address will be displayed.
3. Select the check box of the device that you want to update.
If you click the [Select All] button, all devices will be selected. If you click the [Clear All] button, the
check boxes of all devices will be cleared.
4. Click the [Update] button.
The firmware update will begin.
When the update is completed, the device will automatically restart.
• Do not disconnect the Ethernet cable or power-off the devices while the update is pro-
ceeding.
CAUTION