User Manual

CP300 Owner’s Manual
15
Introduction
Basic Operation
In this section you’ll learn about the fundamental operations of the CP300—the use of the panel buttons and controls and
how to restore the CP300’s memory to the factory default settings.
Each function may have many items or parameters from which you can choose. To select an item or parameter,
press one of the A [–][+] – D [–][+] buttons.
Each parameter in the display corresponds to the A [–][+] – D [–][+] buttons next to it.
Sometimes, after you’ve changed the parameter values or settings, you may want to reset them to their normal
condition. To do this, simply press the [–] button and [+] button simultaneously.
n The TEMPO [DOWN][UP] buttons are the same shape as the A [–][+] – D [–][+] buttons. Parameters
corresponding to button pairs of this shape can all be reset to their default values by pressing both buttons
simultaneously.
To execute the operation, press B [+(YES)] button. To cancel the operation, press the B [– (NO)] button.
In general, when a prompt is shown on the upper right of the display, press the appropriate B [– (NO)]
[+(YES)] buttons to execute or cancel the operation.
Press the [EXIT] button to exit from a function.
Display Settings—Basic Operation
GrandPiano1 Choir
Strings E.Bass
NO YES
A
B
D
C
ClickVolume
100
NO YES
A
B
D
C
SaveToMemory Execute?-->
M-001:NewSong.MID
NO YES
A
B
D
C
NO: Cancel
YES: Execute
NO YES
A
B
D
C
CONTRAST
EXIT
Main Set?-->
Octave 0