Owner's Manual

Basic components
15
EMU26340
Tilt support lever for power trim and
tilt or hydro tilt model
To keep the outboard motor in the tilted up
position, lock the tilt support lever to the
clamp bracket.
EMU26400
Top cowling release lever
The top cowling can be removed by operat-
ing the cowling release lever. Pulling the
front lever unlocks the top cowling for remov-
al.
When installing the top cowling:
1. Set the top cowling straight down onto
the engine, being careful to avoid catch-
ing spark plug wires or other wires.
2. Align the three cowling hooks with the
locks on the bottom cowling.
3. Press down on the top of the cowling at
the front and both sides of the back until
the three locks click.
4. To make sure the cowling is locked
properly push the cowling from each
side. If it lifts, repeat step 3.
CAUTION:
ECM00070
●
Make sure the cowling lock connection
1. Trim tab
2. Bolt
3. Cap
1. Tilt support lever
1
2
3
ZMU02525
A
B
A
B
ZMU01863
ZMU03979
1
ZMU03518
ZMU03519