User Manual

Genos Reference Manual 143
12
MIDI Settings
2 If desired, edit the MIDI parameters based on the MIDI template selected in step 1 in the
relevant setting display.
• System: Lets you set the MIDI System related parameters. .............................................................page 144
• Transmit: Lets you set the MIDI Transmission related parameters. ................................................page 145
• Receive: Lets you set the MIDI Reception related parameters. ........................................................page 146
• On Bass Note: Lets you select the MIDI channels of which the MIDI data coming from
the external MIDI device will be used for detecting the bass note for Style playback.
.........................................................................................................................................................page 147
• Chord Detect: Lets you select the MIDI channels of which the MIDI data coming from
the external MIDI device will be used for detecting the chord type for Style playback.
.........................................................................................................................................................page 147
• External Controller: Lets you select the function assigned to the connected MIDI Controller. ....page 148
3 When you’ve finished editing in each display, touch (Save)
to save the MIDI settings as your original MIDI template.
 Pre-programmed MIDI Templates
Your original MIDI templates can be
saved as a single file to a USB flash
drive. On the display called up via
[MENU]  [Utility]  [Factory Reset/
Backup]  page 2/2, touch [Save] of
“MIDI” to carry out the Save operation
(page 159).
NOTE
All Parts Transmits all parts including the keyboard parts (Right 1–3, Left), with the exception of
Song parts.
KBD & STYLE Basically the same as “All Parts” with the exception of how keyboard parts are managed.
The right-hand parts are handled as “Upper” instead of Main and Layer, and the left-hand
part is handled as “Lower.”
Master KBD1, KBD2
(Master Keyboard)
In this setting, the instrument functions as a “master” keyboard, playing and controlling one
or more connected tone generators or other devices (such as a computer/sequencer).
Master KBD1 transmits AT (After Touch) messages, while Master KBD2 does not
(page 145).
Clock Ext.A
(Clock External)
Playback or recording (Song, Style, etc.) synchronizes with an external MIDI clock via the
MIDI A port instead of the instrument’s internal clock. This template should be used when
you wish to have tempo (synchronization) be controlled from the connected MIDI device.
MIDI Accord1
(MIDI Accordion 1)
MIDI accordions allow you to transmit MIDI data and play connected tone generators from
the keyboard and bass/chord buttons of the accordion. This template lets you control the
keyboard performance and Style playback from a MIDI Accordion.
MIDI Accord2
(MIDI Accordion 2)
Basically the same as “MIDI Accord1” above, with the exception that the chord/bass notes
you play with your left hand on a MIDI Accordion are recognized also as MIDI note events.
MIDI Pedal1 MIDI pedal units allow you play connected tone generators with your feet (especially conve-
nient for playing single note bass parts). This template lets you play/control the chord root in
Style playback with a MIDI pedal unit.
MIDI Pedal2 This template lets you play the bass part for Style playback by using a MIDI pedal unit.
MIDI OFF No MIDI signals are sent or received.