User Manual

140 Genos Reference Manual
Mixer InsEffect
(Insertion Effect
Depth)
Adjusts the Insertion Effect depth of the selected parts.
EQHighG
(EQ High Gain)
Boosts or attenuates the high EQ band for the selected parts.
EQLowG
(EQ Low Gain)
Boosts or attenuates the low EQ band for the selected parts.
Cutoff Adjusts the cutoff frequency of the filter for the selected parts.
Resonance Adjusts the resonance of the filter for the selected parts.
Cut&Reso
(Cutoff & Resonance)
Adjusts the cutoff frequency and resonance of the filter for the selected parts.
Filter Adjusts the parameters such as the cutoff frequency and resonance of the filter for
the selected parts. However, the parameters do not change uniformly, but are spe-
cially programmed to change individually for optimum sound, letting you filter the
sound for the best musical results.
Voice Edit Attack Adjusts the length of time until the selected parts reach their maximum level after
the key is played.
Release Adjusts the length of time until the selected parts decay to silence after the key is
released.
Atk&Rel
(Attack & Release)
Adjusts both the Attack and Release time of the selected parts.
Mod(+), Mod (-)
(Modulation (+),
Modulation (-))
Applies vibrato and other effects to notes played on the keyboard.
Voice Setting Tuning Determines the pitch of the selected keyboard parts.
Octave Determines the range of the pitch change in octave for the selected keyboard parts.
PBRange
(Pitch Bend Range)
Determines the pitch bend range (page 40) for the selected keyboard parts.
PortaTime
(Portamento Time)
Determines the portamento time (page 41) for the selected keyboard parts.
Harmony/Arpeggio HrmArpVol
(Kbd Harmony/
Arpeggio Volume)
Adjusts the volume of the Keyboard Harmony or Arpeggio function.
ArpVel
(Arpeggio Velocity)
Adjusts the velocity of each note of Arpeggio. The value shown in the Live Control
view is indicated as a percentage of the default value for each Arpeggio type.
ArpGateT
(Arpeggio Gate
Time)
Adjusts the length of each note of Arpeggio. The value shown in the Live Control
view is indicated as a percentage of the default value for each Arpeggio type.
ArpUnitM
(Arpeggio Unit
Multiply)
Adjust the speed of Arpeggio. The value shown in the Live Control view is
indicated as a percentage of the default value for each Arpeggio type.
Style RtgRate
(Style Retrigger
Rate)
Adjusts the Style Retrigger length. This is shown as 1, 2, 4, 8, 16 or 32 on the Live
Control view, indicating the note lengths. The first part of the current Style is
repeated in the specified length.
RtgOnOff
(Style Retrigger On/
Off)
Turns the Style Retrigger function on/off. When set to on, a specific length of the
first part of the current Style is repeated when the chord is played.
Category Function Description
Some Voices (such as Piano and E. Piano Voices) may not affected by the setting here.
NOTE
The Style Retrigger function is applied only to the Main section of the Style.
NOTE