User Manual

CP88/73 Supplementary Manual 4
Additional new setting “Touch Sensitivity” to the SETTINGS
[SETTINGS] → Selecting the Touch Sensitivity with encoder dial → [ENTER]
Touch Sensitivity has been added to the SETTINGS.
The Touch Sensitivity functions can be determined for each Voice section.
Touch Sensitivity
Parameter name Description
Piano
Depth
This parameter can be used to select how the velocities with
which keys are played will affect the velocities actually output to
the tone generator for the current Voice section. As shown in
the graph below, the larger the value set, the greater the
degree to which output velocities vary in response to changes
in the playing velocity (i.e., the steeper the slope of the graph).
If a value of 0 is set, the output velocities will be totally
unaffected by different playing velocities, resulting in an
response similar to that of an organ, where playing strength has
practically no effect on the sound produced.
Settings: 0 – 127
Default: 64
When Offset (below) is set to 64:
Velocity with which key is played
Velocity actually output
to tone generator
Depth = 127
Depth = 64
Depth = 32
Depth = 0