Stereo Amplifier User Manual

Graphical user interface (GUI) menu
90 En
■ HDMI Processing (HDMI video processing)
Use this feature to select whether this unit processes the video
signals input at the HDMI IN jacks.
■ Component I/P (Component interlace/
progressive conversion)
Use this feature to activate or deactivate the analog interlace/
progressive conversion of the analog video signals input at the
composite video, S-video and component video jacks so that the
analog video signals deinterlaced from 480i (NTSC)/576i (PAL) to
480p/576p are output at the COMPONENT MONITOR OUT jacks.
• If your video monitor does not support analog video signals with 480p/576p of
resolution, the GUI screen may not be displayed on your video monitor when
“Component I/P” is set to “On”. In such a case, set “INITIALIZE” in “Advanced
setup” parameter to “VIDEO” (see page 120).
• When you set “HDMI Processing” to “On”, you may not set “Component I/P” in
some cases.
■ HDMI Resolution
(HDMI video signal resolution)
Use this feature to activate or deactivate the HDMI up-scaling of the
analog and HDMI video signals input at the composite video, S-
video and component video and HDMI IN jacks so that the up-
scaled video signals are output at the HDMI OUT jacks.
This unit up-scales the analog video signals as follows:
• 480i (NTSC)/576i (PAL) → 480p/576p, 1080i, 720p, or
1080p
• 480p/576p → 1080i, 720p, or 1080p
• 1080i → 480p/576p, 720p, 1080p
• 720p → 480p/576p, 1080i, 1080p
The input video signals may be down-scaled depending on the setting of “HDMI
Resolution”.
■ HDMI Aspect (HDMI aspect ratio)
Use this feature to select whether this unit converts the aspect ratio
of 4:3 video signals and outputs at the HDMI OUT jacks.
• When “HDMI Resolution” is set to “Through”, you cannot make any adjustments to
“HDMI Aspect”.
• If the aspect ratio of the input video source is other than 4:3, this unit automatically
ignores the setting of “HDMI Aspect”.
• When “HDMI Aspect” is set to “Smart Zoom”, the video images of the edge of the
video monitor are rather stretched.
■ Short Message (Short message display)
Use this feature to activate or deactivate the short message display
displayed in the main zone video monitor function.
The short message display does not appear in the following cases:
– when the component video signals with 720p, 1080i or 1080p resolutions are input
– when HDMI video signals are input
■ On Screen (On-screen display time)
Use this feature to set the time for which the iPod menu, or NET/
USB menu is displayed in the video monitor after you perform a
certain operation.
y
This setting is applied to the GUI menu in the main zone and OSD in Zone 2, Zone 3,
or Zone 4.
■ Position (GUI screen position)
Use this feature to adjust the vertical and horizontal position of the
GUI screen.
Control range: –5 (downward/left) to +5 (upward/right)
Choice Functions
Off
Select this setting when you do not want this unit to
process the video signals input at the HDMI IN jacks
even if “Conversion” is set to “On”.
On
Select this setting when you want this unit to process the
video signals input at the HDMI IN jacks when
“Conversion” is set to “On”.
Choice Functions
On
Activates the analog interlace/progressive up-conversion
of the analog video signals.
Off
Deactivates the analog interlace/progressive up-
conversion of the analog video signals.
Notes
Choice Functions
Through
Does not up-scale any video signals.
480p (or 576p),
1080i, 720p,
1080p
Up-scales video signals to 480p or 576p, 1080i, 720p, or
1080p of resolution.
Note
Choice Functions
Through
Does not make any adjustments to the aspect ratio for the
HDMI video signal sources.
16:9 Normal
Displays video images with the aspect ratio of 4:3 on
your video monitor with the aspect ratio of 16:9. Black
stripes appear on the right and left sides as a result.
Smart Zoom
Fits video images with the aspect ratio of 4:3 to your
video monitor with the aspect ratio of 16:9. The signals
are input with 720p, 1080i or 1080p of resolution, this
setting does not affect the video signals output at the
HDMI OUT jack.
Notes
Choice Functions
On
Activates the short message display function.
Off
Deactivates the short message display function.
Note
Choice Functions
Always
Displays the menu unceasingly during an operation.
10sec
Turns off the menu 10 seconds after you perform a
certain operation.
30sec
Turns off the menu 30 seconds after you perform a
certain operation.
:0
+
:0 //
Short Message
On Screen
Position
Wall Paper