Owner's Manual

GEO T RIGGING PROCEDURE Page 31/63

ATTACHING THE LEVA1500 CHAIN TO THE KELPING BEAM

3.5.2 Bumper to fist GEO T4805 assembly

4 push-pins (BLGEOT12-35, 12mm diameter x 35 mm length) connect the top GEO T4805 to the

bumper.

IMPORTANT

These 4 push-pins are slightly longer than the ones used to connect GEO T’s (35mm

length instead of 30mm).

Never use the GEO T 12mm x 30mm push-pins to connect the top GEO T4805 to the

bumper.

FIRST GEO T4805 TO BUMPER ASSEMBLY

• Position the bumper on the first GEO T4805 so that the bumper side slot (A) is at the rear.

• Link the GEO T4805 to the bumper using the four 12mm x 35mm push-pins provided with the

bumper; depress the button at the rear of the pin to release the locking mechanism, insert the pin

fully, and release the button.

• Link the GEO T4805 to the bumper using the four 12mm x 35mm push-pins provided with the

bumper; check that all push-pins are in their locked position.

• Ensure that no objects have been placed accidentally on the top of the bumper as they may fall

when the system is lifted.