Service manual

ENG
INSPECTION AND REPAIR
4-15
4. Inspect:
Bearing (piston pin)
Pitting/Damage

Change
KICKSTART
1. Inspect:
• Pedal gear teeth 
• Pedal pinion gear teeth 
Burrs/Spalling/Non-uniformity/Wear

Change
2. Inspect:
• Locking bolt(pedal pinion gear and one
way clutch)
Rounded edges/Wear

Change
3. Measure:
• Spring tension (pedal pinion gear)
Outside specified value

Change
Use a dynamometer
Standard tension
150 ~ 250 gr