Service manual

CHAS
HANDLEBAR AND STEERING
6-21
8. Remove:
• Upper ring nut
ss
WARNING
Support the steering axle so that it does
not fall.
9. Remove:
• Lock washer
• Central ring nut
• Rubber washer
• Lower ring nut
• Bearing cover
• Lower bracket
INSPECTION
1. Wash the bearing and race with solvent.
2. Inspect:
• Bearings
• Bearing race
Pitted/Damage

Change

Steps for replacing the bearing race:
• Remove steering bearing races using a long
rod  and the hammer as shown.
• Remove the bearing race from the shaft
using a chisel  and the hammer as
shown.
• Install the new mudguard and the guides.

Ring nut wrench for steering
90890-01403