User Manual

En 134
■ DSP Skip
Set which sound programs are skipped when operating the PROGRAM key.You can select the
desired sound program quickly by using this function.
Settings
■ Remote Key
Configures the Remote Key settings.
PROGRAM Key
Sets the function that is assigned to the PROGRAM key on the remote control. You can use the
PROGRAM key for other than DSP program selection.
Settings
X
This setting does not change the function of the PROGRAM key on the front panel.
Color Key
Set the unit's functions for the RED/GREEN/YELLOW/BLUE keys of the remote control.
Settings
Y
• For details on “HDMI Control” in the “Setup” menu, see “HDMI Control” (p.124)
• To use HDMI control, you need to perform the HDMI Control link setup after connecting HDMI Control
compatible devices (p.162).
• HDMI Control might not work properly.
■ Display Set
Configures the settings related to the front display and TV screen display.
Dimmer (Front Display)
Adjusts the brightness of the front display.
Setting range
-4 to 0
(higher to brighten)
Y
The front display may become dark when “ECO Mode” (p.136) is set to “On”.
Volume
Switches the scale of the volume display.
Settings
Off
Does not skip the selected sound program.
On Skips the selected sound program.
Assign 1
Enables selecting the DSP Programs.
Assign 2
Enables selecting just the DSP Movie/Music Programs.
The up key of the PROGRAM keys: toggle between the Movie Programs.
The down key of the PROGRAM keys: toggle between the Music Programs
Assign 3 Enables selecting the NETWORK sources.
Assign 4 Enables moving to the previous/next page of the Browse Screen.
Assign 5 Enables fine-adjusting the subwoofer volume.
Assign 6 Enables adjusting the volume of dialogue sounds.
Assign 7
Enables selecting shuffle/repeat settings.
The up key of the PROGRAM keys: repeat
The down key of the PROGRAM keys: shuffle
Assign 8
Displays the front/on-screen display information.
The up key of the PROGRAM keys: front display information
The down key of the PROGRAM keys: on-screen display information
Default
Assigns the functions of devices connected to the unit with an HDMI cable.
This setting is effective when “HDMI Control” is set to “On”.
TV Control
Assigns the functions of TV Control to each key.
RED: EXIT (closes the menu on the TV)
GREEN: INFO (displays information about the TV such as the resolution)
YELLOW: BROADCAST (switches the TV broadcast type)
BLUE: INPUT (switches the TV input)
This setting is effective when “HDMI Control” is set to “On”.
dB
Displays the volume in the “dB” unit.
0-97 Displays the volume in the numeric value (0 to 97).