user manual

90
The Reverb Parameters
The reverb effects are essential to give your sound ambience and a sense of dimension, adding
warmth and depth to an otherwise dry sound.
Type
• Reverb Type
• Settings: NO EFFECT, HALL 1, HALL 2, ROOM 1,
ROOM 2, ROOM 3, STAGE 1, STAGE 2, PLATE, WHITE
ROOM, TUNNEL, CANYON, BASEMENT
Selects the reverb type, or “NO EFFECT” if no
reverb effect is required. Refer to the separate “List
Book” for brief descriptions of each of the reverb
types.
Type-Specific Reverb Parameters
• See separate “List Book”
Each of the reverb types, selected via the “Type”
parameter, above, has a different set of parameters
that specify the actual reverb sound. Refer to the
separate “List Book” for information on the
individual parameters for each reverb type.
Rev Pan
• Reverb Pan
• Settings: L63 … C … R63
Sets the pan position of the reverb sound — i.e. the
perceived position of the reverb sound within the
stereo sound field. A setting of “L63” sets the
reverb sound full left, “R63” sets the sound full
right, and “C” places the sound in the center.
Intermediate settings pan the reverb sound to
corresponding positions in the stereo sound field.
Effects & Effect Editing