user manual

67
Filter & Envelope Generator Editing
Accessing & Editing the Filter & EG Param-
eters
The FILTER & EG EDIT mode can be accessed from the PLAY mode as
follows:
1. Press [EDIT]
Press the [EDIT] button to go to the EDIT sub-mode menu.
2. Select the FIL&EG Sub-mode
Use the SELECT [<] and [>] buttons to select the FIL&EG sub-mode, if
necessary. The icon to the left of “FIL&EG” on the display will flash when
the FIL&EG sub-mode is selected.
3. Press [ENTER]
Press the [ENTER] button to go to the FILTER & EG EDIT mode.
“FIL&EG EDIT” will appear at the top of the display along with the number
of the currently selected control parameter.
4. Select a Parameter
Use the SELECT [<] and [>] buttons to select the parameter you want to
edit (see “The Filter & EG Edit Parameters”, below). The name of the
currently selected parameter and its current setting appear on the second line
of the display. An arrow to the left and/or right of the parameter name/value
indicates that the SELECT [<] and/or [>] buttons can be used to select
more parameters in the indicated direction.