user manual

The VOICE PLAY Mode

(Bank Pointer)

Settings: Pr1, Pr2, Cst

This parameter refers to the bank containing the

selected voice in the VOICE PLAY main control

mode. It selects the VL70-m PRESET 1 (Pr1),

PRESET 2 (Pr2) or CUSTOM (Cst) voice bank

(see “Voice Organization” on page 26).

(Program Pointer)

Settings: 001 … 128

This parameter refers to the selected voice in the

VOICE PLAY main control mode. The PRESET 1

and PRESET 2 banks each have voice numbers

from “001” to “128”, and the CUSTOM bank has

voice numbers from “001” to “006”.

RevSend (Reverb Send)

Settings: 000 … 127

Adjusts the level of the signal sent to the VL70-m

reverb effect stage. The higher the value, the

higher the level of the reverb send signal.

ChoSend (Chorus Send)

Settings: 000 … 127

Adjusts the level of the signal sent to the VL70-m

chorus effect stage. The higher the value, the

higher the level of the chorus send signal.

VarSend (Variation Send)

Settings: 000 … 127

Adjusts the level of the signal sent to the VL70-m

variation effect stage. The higher the value, the

higher the level of the variation send signal.

NoteSft (Note Shift)

Settings: -24 … 0 … +24

Transposes the pitch of the current voice down or

up in semitone steps over a ±2 octave range. “+00”

corresponds to standard pitch. Each increment

corresponds to a semitone. A setting of “-12”, for

example, transposes the pitch down one octave.

■

NOTES

• The Reverb Send, Chorus Send, Variation Send, Note

Shift settings are actually voice parameters, and are

stored and recalled with each individual voice. This

means that any edits you make may change when a

new voice is selected.