user manual

DevNo. (Device Number)

Settings: 001 … 016, all

The Device Number parameter must be set prop-

erly when you want to transmit or receive MIDI

system exclusive data to or from another VL70-m

or other MIDI device (system exclusive data

includes voice parameters, system setup param-

eters, etc). The VL70-m Device number must be

set to the same number as the Device Number of

the external device. Select a device number from

“001” to “016”, or “all”. When “all” is selected,

MIDI system exclusive data can be received on all

device numbers, but transmission occurs via device

number 001.

(Bank Number)

Settings: Pr1, Pr2, Cst, Int

Selects the VL70-m PRESET 1 (Pr1), PRESET 2

(Pr2), CUSTOM (Cst), or INTERNAL (Int) voice

bank (see “Voice Organization” on page 26).

(Program Number)

Settings: 001 … 128

Selects the voice to played on the VL70-m. The

PRESET 1 and PRESET 2 banks each have voice

numbers from “001” to “128”, while the INTER-

NAL bank has voice numbers from “001” to

“064”, and the CUSTOM bank has voice numbers

from “001” to “006”.

Volume

Settings: 000 … 127

Sets the volume of the current voice. The higher

the value the louder the volume.

Pan

Settings: Rnd, L63 … C … R63

Sets the pan position of the current voice — i.e.

the position of the voice between left and right in

the stereo sound field. A setting of “L63: sets the

pan position full left, “C” sets the pan at center,

and “R63” sets the pan full right. In between

settings produce corresponding intermediate pan

positions. The “Rnd” setting produces a randomly-

generated pan position.

RevRtn (Reverb Return)

Settings: 000 … 127

Adjusts the level of the signal returned from the

VL70-m reverb effect stage. The higher the value,

the higher the level of the reverb signal.

The VOICE PLAY Mode