Specifications

Selecting Automatically reset all MIDI Controllers used within either MIDI Control
Chains A B will reset any MIDI Controller to their coresponding default value once the
controller has been de- selected. This function is very useful for example if a user had
selected Speed to Volume Controller no 7. if the user moved within a beam very
slowly, transmitting a very low Volume Controller number, then de selecting the Con-
troller in the MIDI Control Chain, subsequent interruptions would still transmit the
low Volume controller level set via the last interruption of the Beam. This would result
in a confusing silence emanating from movements in the beam. If Controller Reset is
enabled then any MIDI Controller levels are reset to the Default value, in the case for
Volume this is 100.
Below is a table with some of the most common used MIDI Controllers with their
default values.
rellortnoCIDIMrebmuNeulaVtluafeD
noitaludoM10000
emuloV700001
noitisoPnaP010460
noisserpxE110001
erbmiTdnuoS170460
emiTesaeleRdnuoS270460
emiTkcattAdnuoS370460
ssenthgirBdnuoS470460
Desktop Soundbeam Manual Page 55