User Manual
“Daylight Saving Time” dialog box Chapter 7. Dialog boxes/Software applications
MTX-MRX Editor User Guide
185
❑ “Daylight Saving Time” dialog box
This specifies the daylight saving time setting of the MTX/MRX devices connected to the same
network, regardless of their online/offline state.
• Events that are assigned within two hours before or after the beginning or end of daylight
saving time in the “Scheduler” dialog box will not be executed correctly.
• When you create a new project, the daylight saving time setting from the computer’s “Date
and Time” settings will be automatically shown in this dialog box.
● Unit ID
Indicates the UNIT ID.
● Type
Indicates the type of device.
● Device Name
Indicates the device name.
● DST
This indicates On if daylight saving time is specified for the device; it indicates Off if
daylight saving time is not specified.
● Offset
Indicates the amount of time by which the device’s daylight saving time is earlier than
standard time.
● Start Time
Indicates the time at which daylight saving time starts for the device.
● End Time
Indicates the time at which daylight saving time ends for the device.
NOTE