Service manual

FUEL INJECTION SYSTEM
7-62
Fault code No. 62 Symptom Muffler cooling fan temperature sensor: open or short cir-
cuit detected.
Diagnostic code No. 12 Muffler cooling fan temperature sensor
Order Item/components and probable
cause
Check or maintenance job Reinstatement
method
1 Installed condition of muffler cooling
fan temperature sensor.
Check for looseness or pinching. Turning the
main switch to
ON.
2 Connections
Muffler cooling fan temperature
sensor coupler
Main wire harness ECU coupler
Check the coupler for any pins
that may be pulled out.
Check the locking condition of
the coupler.
If there is a malfunction, repair it
and connect the coupler
securely.
3 Open or short circuit in wire harness. Repair or replace if there is an
open or short circuit.
Between muffler cooling fan
temperature sensor coupler and
ECU coupler.
(black/blueblack/blue)
(brown/yellowbrown/yellow)
4 Defective muffler cooling fan
temperature sensor.
Execute the diagnostic mode.
(Code No.12)
Replace if defective.
Refer to CHECKING THE
MUFFLER COOLING FAN
TEMPERATURE SENSOR on
page 7-108.