Service manual

FUEL INJECTION SYSTEM
7-37
11 Engine temperature Displays the engine
temperature.
Compare the actually
measured engine
temperature with the meter
display value.
12 Muffler cooling fan
temperature
Displays the muffler cooling
fan temperature.
Compare the actually
measured muffler cooling
fan temperature with the
meter display value.
20 Sidestand switch Set ON/OFF the Sidestand
switch. (with the
transmission in gear.)
• Stand retracted ON
• Stand extended OFF
21 Neutral switch Shift the transmission.
• Neutral ON
• In gear OFF
53 EXUP servo motor Displays the operating angle.
Engine trouble warning light
comes on twice: once when
the EXUP valve is closing
and once when it is opening.
—
60 EEPROM fault code
display
—
• No history 00
• History exists 01 or 02 (Cylinder fault code)
• (If both cylinders are
defective, the display
alternates every two
seconds.)
61 Malfunction history code
display
—
• No history 00
• History exists Fault codes 12-63
• (If more than one code
number is detected, the
display alternates every two
seconds to show all the
detected code numbers.
When all code numbers are
shown, the display repeats
the same process.)
62 Malfunction history code
erasure
• No history 0 —
• History exists Up to 28 fault codes To erase the history, set the
engine stop switch to “”.
Diag-
nostic
code
No.
Item Meter display Checking method