User's Manual

4. Remove the dipstick and drain bolt to drain
the oil.
cC
When removing the drain bolt, the compres-
sion spring, oil strainer and O-ring will fall
out. Take care not to lose these parts.
5. Clean the oil strainer with solvent.
6. Inspect the O-ring and replace it if damaged.
7. Install the O-ring, oil strainer, compression
spring and drain bolt. Tighten the drain bolt to
specification.
cC
Before installing the drain bolt, be sure to
install the O-ring, compression spring and
oil strainer.
8-6
Tightening torque:
Drain bolt (engine):
32 Nm (3.2m0kgf, 23 ft0lbf)
q
r
e
w
q
1. Drain bolt 2. O-ring
3. Compression spring 4. Oil strainer
5VJ-9-10-3 3/26/02 7:31 PM Page 8-7