User manual

– 11 –
SPEC
CABLE ROUTING
1 Battery breather hose
2 Spark plug cap
3 Ignition coil
4 Starter motor lead
5 Rear brake cable
6 Rear brake breather hose
Å Make sure that the battery breather hose is not kinked or bent.
ı Route the rear brake cable through the cable guide on the cyl-
inder.
Ç Fasten the starter motor lead to the frame with the plastic
clamps.
Î Fasten the battery breather hose to the frame with the plastic
clamps.
‰ 50 ~ 60 mm (2.0 ~ 2.4 in)